| Technical Data | HD 6/15 KAP | HD 7/16 | HD 10/25 | HDS 7/16 C | HDS 8/18-4 M |
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
| Supply Valtage (Phase) | 1 | 3 | 3 | 3 | 3 |
| Water Flow (l/hr ) | 450-600 | 400-700 | 500-1000 | 270-660 | 400-800 |
| Working Pressure (bar/Mpa) | 70-150/7-15 | 70-160/7-16 | 30-250/3-25 | 30-160/3-16 | 30-180/3-18 |
| Connecting Load (kW) | 3.4 | 4.3 | 9.2 | 4.7 | 5.5 |
| Maximum Temperature (*C) | 60 | 60 | 60 | 80/155 | 80/155 |
| Fuel Tank (l) | – | – | – | 15 | 25 |
| Detergent Tank (l) | – | – | 6 | 15.5 | 10+20 |
| Weight (kg) | 52 | 55 | 62 | 103 | 155 |
| Maximum Pressure (bar/Mpa) | 190 | 220 | 275 | 195 | 215/21.5 |
| Dimensions (LxWxH) (mm) | 700x455x1010 | 780x360x500 | 560x500x1090 | 1060x650x920 | 1330x750x1060 |
| Order No. | 1.367-306.0 | 1.353-913.0 | 1.286-902.0 | 1.173-900.0 | 1.077-908.0 |
- +91-97129 63000
- nec@innavkar.com
Karcher
High Pressure Washers
Wet & Dry Vacuum Cleaners
| Technical | NT 65/2 | NT 40/1 | NT 50/2 | NT 70/2 | NT 90/2 |
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
| Data | Ap | AP L | Me Classic | Me Classic | Me Classic |
| Air Flow Rate (l/s) | 2×74 | 74 | 2×53 | 2×53 | 2×53 |
| Vacuum (mbar) | 254 | 254 | 225 | 225 | 225 |
| Container Capicity (l) | 65 | 40 | 50 | 70 | 90 |
| Power Raiting (W) | 2760 | 1380 | 2300 | 2300 | 2300 |
| Weight (kg) | 20 | 12.4 | 17.5 | 18 | 19 |
| Standard Inside Dia(mm) | 40 | 35 | 40 | 40 | 40 |
| Dimensions (LxWxH) (mm) | 600x480x920 | 525x370x630 | 560x502x687 | 560x502x832 | 560x502x977 |
| Order No | 1.667-291.0 | 1.148.321.0 | 1.667-021.0 | 1.667-224.0 | 1.667-701.0 |
Carpet Care Machines (Puzzi 10/1)
| Technical Data | Puzzi 10/1 |
|---|---|
 |
|
| Air Flow Rate (l/s) | 54 |
| Vacuum (mbar) | 220 |
| Spray Rate (l/min) | 1 |
| Spray Pressure (bar) | 1 |
| Fresh/Dirty Water (l) | 10-Sep |
| Power Raiting (W) | 1250 |
| Weight (kg) | 10.7 |
| Dimensions (LxWxH) (mm) | 705x320x435 |
| Order No | 1.100-138.0 |
Scrubber Driers (BD 43/40 EP)
| Technical Data | BD 43/40 EP |
|---|---|
 |
|
| Power Supply ( Phase) | 1 |
| Motor Rating (W) | 800 |
| Max. Theor. Performance (m.sq./hr) | 1720 |
| Working Width (mm) | 430 |
| Suction Width (mm) | 740 |
| Tank Capacity, Dirty/Clean (l) | 40/40 |
| Weight (Dry) (kg) | 56 |
| Dimensions (LxWxH) (mm) | 1137x505x1028 |
| Vacuum (mbar) | 122.58 |
| Vacuum Motor Power (W) | 700 |
| Order No | 1.515-404.0 |
Sweepers (KM 70/20 C)
| Technical Data | KM 70/20 C |
|---|---|
 |
|
| Drive | Manual |
| Area Performance (m.sq./hr) | 2800 |
| Working Width w/o Brush (mm) | 480 |
| Working Width w/ Brush (mm) | 700 |
| Waste Container (l) | 42 |
| Weight (kg) | 23 |
| Dimensions (LxWxH) (mm) | 1300x765x1035 |
| Order No | 1.517-106.0 |
Steam Cleaners (SG 4/4)
| Technical Data | SG 4/4 |
|---|---|
 |
|
| Voltage (V) | 220-240 |
| Heating Capicity (W) | 2300 |
| Tank Capicity (l) | 4 |
| Steam Pressure (bar) | 4 |
| Weight Without Accessories (kg) | 8 |
| Dimensions (LxWxH) (mm) | 475x320x275 |
| Order No | 1.092-104.0 |
Entry Level High Pressure washers (HD 5/11 Cage classic)
| Technical Data | HD 5/11 Cage classic |
|---|---|
 |
|
| Supply Valtage (Phase) | 1 |
| Water Flow (l/hr ) | 500 |
| Working Pressure (bar/Mpa) | 110/11 |
| Connecting Load (kW) | 2.2 |
| Weight (kg) | 22 |
| Maximum Pressure (bar/Mpa) | 160 |
| Dimensions (LxWxH) (mm) | 475x330x332 |
| Order No | 1.520-204.0 |
Singal Disc Machines (BDS 43/150 C Classic *IN)
| Technical Data | BDS 43/150 C Classic *IN |
|---|---|
 |
|
| Working Width (mm) | 430 |
| Power Rating (W) | 1500 |
| Brush Contact Pressure (g/cm2) | 30 |
| Pad Rotation Speed (rpm) | 150 |
| Power Supply (V/hz) | 220-240/50 |
| Weight (kg) | 43 |
| Dimensions (LxWxH) (mm) | 590x430x1180 |
| Order No | 1.291-260.0 |
Accessories & Detergents
| Accessories | Order No. |
|---|---|
| Screw Connector | For HD 6/15 KAP: 4.402-002.0 |
| Quick Coupling | 2.115-000.0 |
| Plug Nipple | 2.115-001.0 |
| HDS Nozzle Pack kit | For HDS 7/16 C: 2.111-018.0 , For HDS 8/18-4C:2.111-019.0 |
| Dust Filter For NT 65/2 Ap | 6.904-014.0 |
| Foam Spray Lance | 2.112-018.0 |
| Membrane Filter For NT35/1 | 6.904-212.0 |
| 250mm Short Lance | 4.112-027.0 |
| 360° Swivel Arm | 9.870-527.0 |
| Connectors For 360° Swivel | 4.111-030.0 |
| Arm | 4.111-033.0 |
| Underbody lance ( Rotating) | 9.870-523.0 |
| Connectors | 4.111-0.33.0 |
| Underbody lance | 4.112-032.0 , 4.112-000.0 |
| Inno Foam set | 2.112-008.0 |